Freezer for separating broken mobile screens (Works with liquid Nitrogen).
About the machine:
Screen Freezing Separator Machine works with liquid nitrogen,
which is in a liquid state at an extremely low temperature. Temperature of liquid nitrogen can readily be
reduced to its freezing point −196 °C by placing it in on a steel plate powered by cooling
of liquid nitrogen.
Operation Steps:
- Connect with an air compressor, turn on the freezer machine power switch, turn on the compressor power switch.
- Adjust temperature control to proper temperature. For iPhone screens: Around Minus 120 degree.
For other LCD screens: Around Minus 130-140 degree.
- Generally pre-cooling time is 5 minutes.
- 10L liquid nitrogen, can work 2 hours continuously, can separate 50 pcs iphone single screens.
- After using this machine, please turn off the switch, and clean working area.
Safety Caution:
- The machine is mainly used in separating broken screens. Be careful with small broken glasses.
- Because of its extremely low temperature, careless handling of liquid nitrogen and any objects cooled by it may result in cold burns. In that case, use gloves while handling.
However, a small splash or even pouring down skin will not burn immediately, because the evaporating gas thermally
insulates to some extent, like touching a hot element very briefly with a wet finger. If the liquid nitrogen pools
anywhere, it will burn severely.
Benefits of purchasing our Machines:
- Made in India
- Warranty issues if any can be solved locally in India
- We will provide you with training as well to use the product
- No hassles of importing
- You deal directly with the manufacturer or their authorized distributors
- We do the entire tie up for you, including procuring of liquid nitrogen
Comparison Between similar Nitrogen and Freezing separator Machines
Nitrogen LCD Separator Machine
Compressor LCS Separator Machine
Faster cooling time, within 5 minutes you are ready to start the separation
Longer cooling time, takes 80 minutes to cool the plate and then you are ready to start the separation
Proven Technology since liquid nitrogen temperature is -196 degree centigrade
Compressor technology does not have a history of reaching -150 degree Centigrade or above
Cost of equipment is cheap
Cost of equipment is high
Longer life of the machine
Maximum life is 3 – 4 years of the machine since it is based on compressor technology
Zero or no maintenance cost
Maintenance cost is higher
Zero or No dependency on electricity
High dependency is on electricity
Drawback: Availability of liquid nitrogen
Advantage: Works on Freeon GAS
Advantage: Since there are no moving parts except the air compressor zero or very minimal chances of break down
Drawback: Technical expertise is required in case of break -down of equipment
Benefits of Liquid Nitrogen Mobile LCD Separator compared to heating process
Nitrogen LCD Separator Machine
Heating Process with machine / heater
Display and touchpad are separated without damage to touchpad and display
Chances of display / touchpad breakage is very high
Removal time is much lesser
Removal time and possibility of damage to display and touchpad is higher
You can change individual components i.e. touch pad / toughened glass / display
Chances of display / touchpad breakage is very high hence you cannot change touch pad / toughened glass / display individually
Package content:
- 1 No. – Mini Freezing Separator
- 1 No. – Liquid nitrogen tank (11 or 26 or 55 Lrs)
- 1 No. – Air pump
- 1 No. – Pipe
- 1 No. – Power source
- 1 No. – Black Hose
Q1: Why should you buy our products, its an Indian Technology?
We have an expert team for manufacturing the product, expertise for use of liquid nitrogen.
We are experienced, we know what we sell, so you will have the same machines and parts with stable quality.
Choose us, you don't have to waste time and money looking for a suitable Chinese supplier.
We have everything you need and the quality you need.
Q2. What is the minimum order quantity (MOQ) of the product?
With respect to machines only one set to start with.
Q3. How about warranty of the product?
Warranty of the product is 12 months. During the warranty, we can send spare parts for free.
When the warranty is expired ,you just need to pay for the spare parts and freight .
Q4. How about terms of payment?
Advance 50%, and 50% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q5. What is your terms of packing?
Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization.
Q2. What is the minimum order quantity (MOQ) of the product?
With respect to machines only one set to start with.
Q6. What is your sample policy?
We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
Yes, we have 100% test before delivery.
Q8. How do you make our business long-term and good relationship?
We keep good quality and competitive price to ensure our customers benefit.